Here is a list of robotic vacuum attributes explanations found in comparison charts and specification options:
1. Operating Time (hours) – This refers to the length of time the robot vacuum will function before its batteries run out of power.
2. Charge Time (hours) – This is the amount of time it takes for the device’s batteries to become fully recharged.
3. Operating Pattern – Some robotic vacuum cleaners move in particular pattern as they clean.
Some have multiple ways to maneuver throughout areas that need to be cleaned, including mapping what is in a room, starting with walls first and cleaning systematically from there or doing such things as operating in a spiral or other patterns that sweep the floor.
4. Scheduled Cleaning – With particular robot vacuums, you can program them to operate at a certain time on certain days, which means the cleaner can do its work while you are away.
5. Infrared Sensor – This refers to a sensor that helps the vacuum navigate throughout the room.
6. Dirt Sensor – This refers to a sensor that detects dirt on the floor.
7. Hardwood, Tile & Linoleum – This refers to the type of flooring or floor covering that a robot vacuum is able to clean.
8. Carpet – This indicates that a robot vacuum can handle cleaning carpets. However, even the best cannot handle extremely tall or thick carpeting, such as shag carpeting.
9. Spot Mode – This refers to a robot vacuum’s attention to a particular area on the floor because it is especially dirty.
10. Height Adjustment– Most robot vacuums can move from one type of flooring to another with little difficulty, as long as both types of flooring are relatively equal in height.
Some highly ranked models of vacuum robots automatically adjust to accommodate different heights that need cleaning.
For example, a robot vacuum with auto height adjustment can quickly move from a flat hardwood floor to a pile carpet and back again.
11. HEPA Filter – HEPA (high-efficiency particulate air) filters meet U.S. Department of Energy standards for efficiency. They are exceptionally good at trapping small particles of dust or dirt as well as certain allergens.
12. Multi-Room Navigation – This indicates that a robot vacuum can maneuver itself through different rooms as it cleans.
13. Battery Indicator – This is a display that tells you when the battery is running low. Some models have lights that change color when the battery is low versus when it is fully charged.
14. Full Bin Indicator – This refers to light or a beep that lets you know the dust bin needs to be emptied.
15. Cliff Sensor – This refers to the sensor that keeps the vacuum cleaner from falling down the stairs. The sensor helps the robot vacuum determine that a drop-off is near and it automatically turns away.
16. Charging Base – This is a device that you plug into an electrical outlet and leave there so that your robotic vacuum can recharge its batteries.
17. Return to Charging Base – The best robot vacuums return to their charging bases automatically when their batteries need to be recharged.
18. Bumper – This is a rubber or plastic strip around the exterior diameter of the robot vacuum that prevents it from scuffing walls or furniture.
19. Boundary Markers – These are the magnetic strips of rubber that you place on the ground to keep the vacuum cleaner from going where it shouldn’t.
20. Virtual Walls – Virtual walls are small devices that emit an invisible infrared signal.
You place them at the entrance of rooms that you don’t want your robot cleaner to go. When the cleaner’s sensors read the signal, they turn around.
21. Remote Control – Some robotic vacuums come with a handheld remote control that you can use to program or control them.
That were most common robotic vacuum attributes you should consider when searching or purchasing robotic vacuum. If you have any questions feel free to contact us and we will get back with response as soon as possible.